(MQQSC069) Quartz Flow Cell, 5/2.5 mm Paths, 125 µL, 1/4–28 UNF Ports
$828.00
JGS1 quartz flow cell with 5 mm and 2.5 mm optical paths, four-sided optical access and 125 µL nominal capacity. Two opposed female-threaded ports carry the full interface designation 1/4–28 UNF 2B x 4.5/5; select mating fittings for that complete interface. Molded 83 fabrication; one cell body supplied.
Description
MQQSC069 is a compact JGS1 quartz flow cell for fluorescence spectroscopy, combining 5 mm and 2.5 mm optical paths in one four-sided optical access body. Its 125 µL nominal capacity helps keep the sample region small, while the two opposed female 1/4-28 UNF 2B x 4.5/5 threaded ports give you a defined end-connection format for fixed tubing layouts.
This option suits setups where both the optical direction and the fluid interface need to be chosen before installation. The quartz body measures 12.5 × 12.5 × 34 mm, so you can check holder clearance separately from the extra space needed for fittings at each threaded end.
- Path Length
- 5 mm / 2.5 mm (dual path)
- Sample Volume (Nominal)
- 125 µL
- Opening Configuration
- Two Opposed Threaded Fluid Ports
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | Fluorescence Spectroscopy |
| Path Length | 5 mm / 2.5 mm (dual path) |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 125 µL |
| External Dimensions | 12.5 × 12.5 × 34 mm |
| Cell Body Dimensions | 12.5 × 12.5 × 34 mm |
| External Dimensions Scope | Body Only |
| Body Height | 34 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Internal Dimensions | 5 × 2.5 × 10 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Port Thread | 1/4-28 UNF 2B x 4.5/5 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Two Opposed Threaded Fluid Ports |
| Port Layout | Female threaded axial end A, shown at the top; Opposite female threaded axial end B, shown at the bottom |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose MQQSC069 when you need a fluorescence flow cell with side optical access and threaded axial connections instead of an open-top cell or plain tube-end format. It is especially useful when your method is built around a compact flow path, a specific threaded fitting standard and a selected beam direction through either the 5 mm or 2.5 mm path.
What makes this option different
- Dual 5 mm and 2.5 mm optical paths let you select the stated measurement direction that matches your method geometry.
- four-sided optical access configuration provides optical access through four side faces for fluorescence-style layouts.
- Two opposed female 1/4-28 UNF 2B x 4.5/5 threaded ports support end-connected installation with matching external fittings.
- 125 µL nominal capacity keeps the cell compact without treating that figure as the minimum working volume.
- Molded 83 fabrication is the fabrication option for the quartz body.
Using this cell
Four optical faces are separate from the two fluid connections. The measurement direction selects the 5 mm or 2.5 mm optical path; it does not create separate liquid circuits. Keep the selected orientation the same for the blank and sample.
Install the cell with the intended optical direction fixed in your method, then connect the liquid path through the two opposed threaded ports. Fill gradually and inspect the illuminated sample region before measurement so trapped bubbles can be cleared before they sit in the beam path.
The 125 µL figure is the nominal capacity of the cell body. It does not state the minimum working volume, and it does not include any volume in external fittings or tubing.
First-use check
- Inspect the optical faces and threaded port openings before assembly.
- Confirm that the cell seats securely and that the selected beam direction crosses the intended sample region.
- Run a suitable blank after filling, then repeat after bubble removal if needed.
Fit and optical alignment
The complete specified fluid-interface designation is 1/4-28 UNF 2B x 4.5/5. Match the mating component to the full designation; a nominal thread identifier alone does not establish the sealing seat or a pressure rating.
View the English selection reference.
The bare optical body is 12.5 × 12.5 × 34 mm. Use those dimensions to check holder seating, then allow additional clearance for the fittings that engage with the 1/4-28 UNF ports at both ends.
Z Height is not stated for this item. If your holder or optical train depends on a fixed beam-centre height, check that alignment requirement before ordering.

Solvents and cleaning
This JGS1 cell uses Molded 83 fabrication. Select sample and cleaning conditions for the complete wetted assembly, including any mating fittings, seals and tubing. For organic solvents or heated cleaning, confirm suitability for the actual chemical, concentration, temperature and contact time; the fabrication designation alone does not define the assembled system’s limits.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with non-abrasive optical tissue, and check any added fittings separately for their own chemical compatibility.
Included with this option
One quartz flow cell body with the two female-threaded ports shown. Select mating fittings and tubing separately; the listed price is per cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz projects for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, threaded interfaces, fabrication and tolerance requirements. Modified designs and prototype batches are quoted separately, with final specifications, quantity, price and production time confirmed for the project.
Send a product-selection enquiry with SKU MQQSC069, your holder or instrument details, sample conditions, quantity and destination.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.










Reviews
There are no reviews yet.