(C102SS37) Quartz Micro Cuvette, 10 mm Path, 1.05 mL

Weight	30 g

SKU: C102SS37

Original price was: $76.00.Current price is: $69.00.

In Stock

C102SS37 is a JGS1 quartz micro cuvette for UV/Vis spectroscopy with a 10 mm optical path, a 3 mm sample-region slit and 1.05 mL nominal capacity. This Two-Way Light version is supplied with a closure and is sold as 1 cuvette per price unit.

In Stock

SKU: C102SS37 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102SS37 is a JGS1 quartz micro cuvette for UV/Vis work that combines a standard 10 mm optical path with a narrower 3 mm sample region. Its 1.05 mL nominal capacity and included closure make it a practical choice when you want a stoppered micro cell rather than a full-width cuvette format. This version is intended for neutral solutions only.

Path Length: 10 mm
Sample Volume (Nominal): 1.05 mL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	3 mm
Sample Volume (Nominal)	1.05 mL
Material	Quartz
Material Grade	JGS1
Closure Type	Stopper
Closure Included	Yes
Detection Channel Width	3 mm

Choose this option

Choose C102SS37 when your method calls for a 10 mm path length but your sample region needs to stay within a 3 mm slit format. The stoppered top helps with routine filling and handling in micro-volume work, while the stated nominal capacity gives you a useful planning point for sample preparation. It suits straight-through UV/Vis measurements in setups that can accommodate this specific microcell geometry.

What makes this option different

10 mm optical path for UV/Vis methods that use this standard path length.
3 mm sample-region slit, separate from the 10 mm path length.
1.05 mL nominal capacity in a micro cuvette format.
Two-Way Light layout with closure included.
Restricted to neutral solutions.

Using this cell

Fill the cell so the illuminated region is fully covered during measurement. After filling, check for bubbles or droplets in the sample region and keep the same orientation for blank and sample so the beam passes through the same part of the cell each time.

Insert the closure gently after filling and avoid forcing it into place. The nominal capacity is the stated full volume of the cell, not a minimum working volume, so low-fill methods should be checked in the actual holder and beam position you use.

First-use check

Inspect the quartz body and optical faces for chips, dust or residue.
Place the cell in your holder and confirm stable seating and beam alignment.
Run a blank with your intended liquid and confirm that the filled sample region is fully covered without trapped bubbles.

Fit and optical alignment

The 3 mm figure describes the sample-region slit, which is useful when you are checking beam coverage in a microcell method. It should not be treated as a complete external fit dimension or a certified clear aperture.

Z Height and full external dimensions are not established for this option. If your instrument has a fixed beam-center height or a tight holder opening, check the holder drawing and beam position before ordering.

Solvents and cleaning

Use this cuvette with neutral solutions only. Keep the same restriction in mind for both sample contact and cleaning routine.

For general construction background, see cuvette fabrication methods. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

1 cuvette per listed price unit. Closure included.

Availability and ordering

Order this listed specification directly, or ask about current availability and dispatch. If your delivery date is important, ask before checkout; preparation or production time is separate from transit and customs clearance.

Discuss a custom version

If you need a different slit width, holder fit or other microcell geometry, send a drawing or describe the change you need. Custom JGS1 quartz enquiries are reviewed separately from this listed specification.