(C101WS) Quartz Reflectance Sample Cell

Weight	30 g

SKU: C101WS

Original price was: $41.00.Current price is: $37.00.

In Stock

C101WS is a JGS1 quartz reflectance sample cell for reflectance measurements, made as an open-top cylindrical cup with a 10 mm outer diameter, 11 mm body height and 1 mm wall thickness. Its low-profile round body suits setups that load sample from above and rely on the sample surface presented in a shallow cylindrical position. Priced per 1 cell.

In Stock

SKU: C101WS Categories: Cuvettes, Products, Quartz Cylinder Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C101WS is a JGS1 quartz reflectance sample cell for reflectance measurements in a low-profile cylindrical format. The open-top body gives direct access to the sample area, while the 10 mm outer diameter and 11 mm uncapped body height help you match the cell to a holder or stage built around a shallow round sample position.

This format is useful when the sample surface itself is part of the setup. You can load material from above, prepare the exposed surface, and remove or replace the sample without working through a cap or narrow neck.

Cell Type: Reflectance Sample Cell
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Specialized Cell
Cell Type	Reflectance Sample Cell
Measurement Mode	Reflectance Measurements
Pack Quantity	1 Piece
Overall Height without Closure	11 mm
Body Height	11 mm
Outer Diameter (OD)	10 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top (Cell Body)
Wall Thickness	1 mm

Choose this option

Choose C101WS when your method uses a small cylindrical reflectance cup with direct top access and a wider, shorter body shape. The 10 mm diameter, 11 mm height and 1 mm wall thickness are the practical points to check if your fixture, stage opening or support recess is designed around this style of round quartz sample holder.

What makes this option different

Open-top sample access lets you add, level or remove material directly from above.
Low-profile 11 mm body height suits shallow sample positions where vertical clearance matters.
10 mm outer diameter helps match the cup to round holder openings and support pockets.
1 mm wall thickness is part of this exact body geometry.
JGS1 quartz body provides a quartz sample-contact surface for reflectance work.
Powder-fused construction identifies this supplier construction style for this cylindrical quartz cup.

Using this cell

Load the sample directly through the open top and prepare the exposed surface to suit your reflectance method. This is a practical format for powders or other materials that need to be placed, adjusted or cleared between runs.

Because the top remains open, use this cell as an accessible sample cup rather than as a sealed container. If your procedure depends on closure, pressure handling or a defined covered headspace, that should be checked separately before ordering.

First-use check

Inspect the quartz body for chips, cracks or edge damage after unpacking.
Test the mechanical fit in your holder or stage before adding sample.
Run your normal reflectance reference or blank procedure before first measurement.

Fit and optical alignment

Check your holder or stage against the 10 mm outer diameter and the 11 mm uncapped body height. The stated height refers to the open cell body itself.

Z Height is not specified for this SKU. If your instrument requires a defined beam-center height or a fixed sample surface position, confirm that requirement before purchase.

Solvents and cleaning

This quartz cell is described for contact with acids, alkalis and organic liquids, but the chemical conditions are not defined in detail. Match cleaning and sample-contact conditions to your actual solvent, concentration, temperature and exposure time.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. For fabrication background, see Compare fabrication methods.

Included with this option

One C101WS quartz reflectance sample cell.

No closure or additional accessories are established for this listing.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different cylindrical size or another quartz sample-cell geometry, we can review a custom JGS1 quartz version for your application. Send your drawing or labelled sketch, holder details, critical dimensions and sample conditions through Discuss your requirements and reference C101WS.