(C101WS1) Quartz Reflectance Sample Cell
10%
Original price was: $41.00.$37.00Current price is: $37.00.
C101WS1 is a JGS1 quartz reflectance sample cell with an open-top cylindrical body for direct sample loading. This option combines a 10 mm outer diameter, 15 mm body height and 1 mm wall thickness in a compact cup-style format. Supplied as 1 piece.
In Stock
Description
C101WS1 is a JGS1 quartz reflectance sample cell in a compact open-top cylindrical format for reflectance measurements. Its 10 mm outer diameter and 15 mm body height make it easier to plan into small holders or fixtures, while the open top gives direct access to the sample area during loading, positioning and inspection.
- Cell Type
- Reflectance Sample Cell
- Opening Configuration
- Open Top (Cell Body)
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Reflectance Sample Cell |
| Measurement Mode | Reflectance Measurements |
| Pack Quantity | 1 Piece |
| Overall Height without Closure | 15 mm |
| Body Height | 15 mm |
| Outer Diameter (OD) | 10 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Opening Configuration | Open Top (Cell Body) |
| Wall Thickness | 1 mm |
Choose this option
Choose C101WS1 when you need a small quartz sample cup for reflectance work and want direct top access rather than a closed or capped assembly. The short cylindrical body suits setups where physical clearance matters, and the stated 1 mm wall thickness helps you judge the body form for fit and handling. This option is a practical choice when your fixture is built around a compact round cell body.
What makes this option different
- Open-top body: lets you load and inspect the sample directly from above.
- 10 mm outer diameter: useful for compact holder and fixture layouts built around a small cylindrical body.
- 15 mm body height: keeps the cup short where vertical clearance matters.
- 1 mm wall thickness: a stated body detail that helps with physical fit and handling expectations.
- Powder-fused construction: a quartz construction style to consider when reviewing sample chemistry and cleaning routine.
Using this cell
Load the sample directly from the top and prepare the exposed sample surface according to your method. The open body is convenient when you need to place material carefully and check the surface before measurement.
This is an open cell body, not a sealed or pressure-rated assembly. Use it where an open sample cup is appropriate for your handling method, and avoid treating it as a closed-flow or leak-tight cell.
First-use check
- Inspect the rim and body for chips, scratches or residue.
- Confirm that your holder or mount accepts a 10 mm outer diameter cylindrical cell.
- Place the empty cell in the fixture and verify clearance and beam position before running valuable samples.
- Clean and dry the sample-contact area before first use.
Fit and optical alignment
The key fit points available here are the 10 mm outer diameter and 15 mm uncapped body height. Check that your holder accepts this cylindrical body and leaves enough clearance for top loading.
A Z Height is not specified for this option, so do not assume a standard beam-center position from the outer dimensions alone. If your method depends on a defined beam height or instrument-specific cuvette geometry, verify those points with your fixture before ordering.
Solvents and cleaning
The supplier describes this quartz cell as resistant to acids, alkalis and organic liquids, but that statement does not define concentration, temperature or exposure time. Review your actual sample and cleaning conditions before routine use, especially if the chemistry is aggressive or contact time is long.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Rinse promptly after use and handle the cell gently to protect the quartz surfaces. For background on quartz cell construction, see Compare fabrication methods.
Included with this option
Supplied as 1 reflectance sample cell, 1pc/ea. No additional closure or accessory is specified here.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We can review custom JGS1 quartz versions for changes to dimensions, openings or other geometry that affect your holder or measurement arrangement. Send your drawing or labelled sketch, the critical dimensions, instrument or fixture details, sample conditions and required quantity. For custom enquiries, please use Discuss your requirements and reference C101WS1.
Additional information
| Weight | 30 g |
|---|
You must be logged in to post a review.
You may also like…
10%
10%
10%
10%
Related products
15%
(MQC371) Quartz Capillary Tubes (Square), Outer Dim.: 1.4×1.4mm, Inner Dim.: 1.1×1.1mm, Length: 50mm
Original price was: $28.00.$24.00Current price is: $24.00.11%
(MQC361) Quartz Capillary Tubes (Square), Outer Dim.: 0.5×0.5mm, Inner Dim.: 0.3×0.3mm, Length: 25mm
Original price was: $19.00.$17.00Current price is: $17.00.14%
(MQC366) Quartz Capillary Tubes (Square), Outer Dim.: 0.95×0.95mm, Inner Dim.: 0.35×0.35mm, Length: 100mm
Original price was: $38.00.$33.00Current price is: $33.00.14%
Reviews
There are no reviews yet.