(C081WS) Quartz Reflectance Sample Cell

Weight	30 g

SKU: C081WS

Original price was: $41.00.Current price is: $37.00.

In Stock

C081WS is a JGS1 quartz reflectance sample cell for reflectance measurements, made as an open-top cylindrical cup with an 8 mm outer diameter and 16 mm body height. Its powder-fused quartz construction and direct top access suit methods where you place and prepare the sample from above in a compact round holder. Supplied as 1 cell per price unit.

In Stock

SKU: C081WS Categories: Cuvettes, Products, Quartz Cylinder Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C081WS is a compact JGS1 quartz reflectance sample cell for reflectance measurements in a small cylindrical format. The open-top cup gives direct access to the sample area, while the 8 mm outer diameter and 16 mm body height help when your holder or stage is designed for a narrow round cell rather than a rectangular cuvette.

This SKU is made with a powder-fused quartz construction. For practical selection, that means the cell is offered as a fused quartz reflectance cup rather than an adhesive-bonded assembly, which is relevant when you are choosing a simple open sample cup for direct loading, routine handling and cleaning within the actual chemical conditions of your method.

Cell Type: Reflectance Sample Cell
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Specialized Cell
Cell Type	Reflectance Sample Cell
Measurement Mode	Reflectance Measurements
Pack Quantity	1 Piece
Overall Height without Closure	16 mm
Body Height	16 mm
Outer Diameter (OD)	8 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top (Cell Body)
Wall Thickness	2 mm

Choose this option

Choose C081WS when you need a small open quartz sample cup for reflectance work and the physical fit of the cylindrical body matters as much as the sample presentation. It is useful when you want to add powder or other sample material from above, level or inspect the exposed surface, and place the cell into a compact round holder with minimal surrounding clearance.

What makes this option different

Open-top access lets you load and prepare the sample directly from above before measurement.
8 mm outer diameter suits holders or sample positions built for a narrow cylindrical body.
16 mm body height gives a compact vertical format that should be checked as the uncapped cell body.
2 mm wall thickness is part of this specific cup geometry and may matter where holder clearance is tight.
JGS1 quartz material makes this a quartz sample cup rather than a glass accessory.
Powder-fused construction makes this a fused quartz open cell for direct sample contact and routine handling, not a closure-based assembly.

Using this cell

Load the sample from the top and prepare the exposed surface to suit your reflectance method. For powders or loose materials, fill and level the sample area gently so the presented surface is consistent for the measurement position you use.

This is an open sample cup. It is intended for loading, presenting and removing sample material from above, not for sealed, pressure-dependent or closure-dependent use.

First-use check

Inspect the quartz body for chips, cracks or shipping damage before use.
Test the fit in your holder or stage before loading sample.
Run the blank or reference routine used in your reflectance method before measuring important samples.

Fit and optical alignment

Check your holder, stage or adapter against the 8 mm outer diameter and 16 mm body height of the open cell body. Those are the main fit points for this SKU, especially where the sample position accepts only a small round body.

Z Height is not specified for this item. If your instrument depends on a defined beam-center height or a fixed sample presentation height, confirm that requirement before ordering.

Solvents and cleaning

The source describes this quartz cell for contact with acids, alkalis and organic liquids, but without detailed limits for concentration, temperature or exposure time. Use that as a general direction only, and match both sample contact and cleaning to your actual method conditions.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. For fabrication background, see Compare fabrication methods.

Included with this option

One C081WS quartz reflectance sample cell.

No closure or additional accessories are established for this listing.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different body size, opening geometry or other cell dimensions, we can review a custom JGS1 quartz version for your application. Send your drawing or labelled sketch, holder details, critical dimensions and sample conditions through Discuss your requirements and reference C081WS.