(C071WS) Quartz Reflectance Sample Cell

Weight	30 g

SKU: C071WS

Original price was: $41.00.Current price is: $37.00.

In Stock

C071WS is a JGS1 quartz reflectance sample cell with an open-top cylindrical body for direct sample loading from above. Its 7 mm outer diameter and 15 mm body height suit compact holders or stages that accept a small round cup.

In Stock

SKU: C071WS Categories: Cuvettes, Products, Quartz Cylinder Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C071WS is a compact JGS1 quartz reflectance sample cell in an open-top cylindrical format. The 7 mm outer diameter helps when your holder or stage is built around a small round body, and the 15 mm body height is useful where vertical space around the measurement position is limited.

This cell is intended for reflectance measurements, where the sample is placed directly into the cup and presented at the top opening. It is best selected by matching the holder geometry and the way your sample surface is prepared, rather than by transmission-cuvette parameters such as path length or nominal volume.

Cell Type: Reflectance Sample Cell
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Specialized Cell
Cell Type	Reflectance Sample Cell
Measurement Mode	Reflectance Measurements
Pack Quantity	1 Piece
Overall Height without Closure	15 mm
Body Height	15 mm
Outer Diameter (OD)	7 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top (Cell Body)
Wall Thickness	1 mm

Choose this option

Choose C071WS when your reflectance setup uses a small cylindrical sample cup and you want direct top access to the sample area. The open body makes it practical for powders, packed solids, pastes or other materials that need to be placed, leveled or inspected from above before measurement. Its short, narrow form also helps when surrounding fixture space is limited.

What makes this option different

Open-top sample access: the sample region is reached directly from above, which supports manual loading, surface preparation and removal after the run.
7 mm outer diameter: this small round body is suited to holders or stages sized for a narrow cylindrical cup.
15 mm body height: the short body helps with installations that have limited clearance above or around the measurement point.
1 mm wall thickness: a stated body detail that can help when you assess mechanical fit and edge clearance in a compact holder.
Powder-fused construction: load and clean the cup through the open top; the process name does not establish a chemical or temperature rating for your sample conditions.
JGS1 quartz body: a quartz sample cup for reflectance work where your method calls for a quartz contact surface and direct access to the sample area.

Using this cell

Load the sample from the top and prepare the exposed surface in the way your reflectance method requires. For powders, granules, pastes or packed materials, aim for a repeatable surface condition and placement so that reference and measurement runs are handled the same way.

This is an open sample cup, not a sealed cell. It is not presented as a defined transmission cuvette, and no stated optical path, Z Height or nominal working volume is given for methods that depend on those values.

First-use check

Inspect the quartz body for chips, cracks, residue or edge damage.
Place the cell in the holder and confirm stable seating without excessive clamping force.
Check that you have enough top clearance to load and prepare the sample surface as planned.
Run your normal reference or background routine using the same placement and orientation intended for measurement.

Fit and optical alignment

Check the 7 mm outside diameter and 15 mm body height against your holder or stage before ordering. Also allow enough top access for loading, leveling, inspection and sample removal without striking nearby fixture parts.

Z Height is not stated for this item. If your reflectance accessory depends on a fixed beam position relative to the sample surface, verify the actual seated position in your holder rather than assuming alignment from the outside dimensions alone.

Solvents and cleaning

The supplier describes this quartz cell as suitable for contact with acids, alkalis and organic liquids, but the chemical conditions are not specified in detail. Treat that as a general material direction, not as a complete compatibility list for every concentration, temperature or exposure time.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods, and clean and dry the cell gently after use. For more background on fabrication terms used across cuvette types, see Fabrication Method of Cuvettes.

Included with this option

The listed price is for 1 C071WS reflectance sample cell. Confirm any required cover or additional accessories separately.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to body size, holder fit or other installation-related details. Send a drawing or labelled sketch together with holder information, sample type, quantity and any critical dimensions.

Discuss your requirements and quote part number C071WS.