(C104CD3) Quartz Ultra-Micro Cuvette, 10 mm Path, 200 µL

Weight	30 g

SKU: C104CD3

Original price was: $171.00.Current price is: $154.00.

In Stock

C104CD3 is a quartz Ultra-Micro Cuvette with a 10 mm optical path, Four-Way Light layout and 200 µL nominal capacity. Its open-top format gives direct pipette access, and the 8.5 mm Z Height helps when your holder or instrument uses a lower beam centre. Supplied as 1 cuvette.

In Stock

SKU: C104CD3 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CD3 is a quartz Ultra-Micro Cuvette for small-volume measurements that still need a 10 mm optical path. This option combines a 200 µL nominal capacity, Four-Way Light access and an open top, with an 8.5 mm Z Height for setups built around a lower beam position. The body size is 12.5 × 12.5 × 45 mm, which helps you review holder fit and clearance before ordering.

Path Length: 10 mm
Sample Volume (Nominal): 200 µL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Ultra-Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Z Height	8.5 mm
Sample Volume (Nominal)	200 µL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Body Only
Material	Quartz
Opening Configuration	Open Top

Choose this option

Choose C104CD3 when you need direct top loading in a compact cuvette body and your optical setup is arranged around an 8.5 mm bottom-to-centre beam reference. The 10 mm path suits methods that are built around this common path length, while the Four-Way Light layout is useful where side optical access matters as well as the main transmission path.

What makes this option different

Open-top access lets you fill and inspect the sample directly from above, with no confirmed cap or cover to plan around.
10 mm optical path keeps this ultra-micro format aligned with methods that specify a 10 mm path rather than a shorter micro cell path.
Four-Way Light configuration provides optical access from four sides for measurement geometries that use more than a simple two-side arrangement.
200 µL nominal capacity supports small-volume handling, while still requiring the illuminated region to be fully covered during use.
8.5 mm Z Height gives a defined bottom-to-optical-centre reference for holder and beam-height checks.
12.5 × 12.5 × 45 mm body-only size helps you check seating space and vertical clearance around the open top.

Using this cell

Load the sample from the top with a pipette or similar controlled filling method. Fill to a level that covers the illuminated region cleanly, and check for bubbles, droplets or residue in the optical area before measurement.

Keep the cell orientation and seating consistent between blank and sample runs. The 200 µL figure is a nominal capacity, not a minimum working volume, so your actual usable fill level depends on how the beam sits in your holder.

First-use check

Inspect the optical faces and top opening for chips, dust or residue.
Place the cuvette in your holder and confirm that it seats squarely.
Run a blank in the same orientation you plan to use for samples.
Verify that the filled sample region fully covers the beam path without bubbles.

Fit and optical alignment

The stated dimensions describe the cell body only: 12.5 × 12.5 × 45 mm. Use these body dimensions to review holder fit, top access and surrounding clearance, especially if you fill the cell in place.

The key alignment figure is the 8.5 mm Z Height from the cell bottom to the optical centre. Compare that bottom-based reference with your instrument beam height rather than relying only on overall cuvette height.

Solvents and cleaning

Compare fabrication options if your selection depends on sample chemistry or cleaning routine. Chemical limits for this exact assembly are not established here, so review the complete cell against your sample and cleaning liquids where compatibility matters.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the exterior optical faces gently with non-abrasive optical tissue.

Included with this option

Supplied as 1 cuvette. A closure or other accessories are not established for this sale option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation. Modified designs and prototype batches are quoted separately from the listed SKU. Discuss your requirements and quote part number C104CD3.