(C102TR5) Quartz Screw-Top Cuvette, 10 mm Path, Pack of 2

Weight	30 g
Dimensions	1.25 × 1.25 × 4.5 mm

SKU: C102TR5

Original price was: $198.00.Current price is: $179.00.

In Stock

C102TR5 is a JGS1 quartz screw-top cuvette with a 10 mm optical path, a Two-Way Light layout and PTFE closures. It is a straightforward choice when you need a capped transmission cell with opposite optical faces and a threaded top opening. Sold as a pack of 2 cuvettes, with PTFE closures included.

In Stock

SKU: C102TR5 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102TR5 is a JGS1 quartz screw-top cuvette with a 10 mm optical path and a Two-Way Light layout. It combines a transmission-style optical path with an internal-thread top opening and PTFE closure, making it useful where you want a covered cell rather than an open-top format.

Supplied as a pack of 2 cuvettes with PTFE closures included. The main selection points here are the 10 mm path, the opposite-face optical layout and the capped screw-top handling style, rather than an open chamber or multi-side optical access.

Path Length: 10 mm
Cell Type: Screw-Top Cuvette
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Material	PTFE
Closure Included	Yes

Choose this option

Choose C102TR5 when your method uses a 10 mm transmission path and you want a threaded, capped quartz cell for routine filling and measurement. The internal-thread format helps you work with a covered sample cell, while the Two-Way Light layout keeps the optical path on opposing faces rather than adding side-access geometry.

What makes this option different

10 mm optical path for methods built around this path length.
Two-Way Light layout provides a straight transmission path through opposite optical faces.
Internal-thread screw-top format gives top access for filling and closing the cell before measurement.
PTFE closures included for the supplied capped-cell configuration of this exact SKU.
JGS1 quartz body for quartz-cell applications where this material is specified.
Pack of 2 preserves the current MQ priced sale unit for this exact option.

Using this cell

Fill each cuvette from the top so the liquid covers the beam path, then fit the PTFE closure gently before use. Keep the two optical faces clean, remove visible bubbles from the beam area and use a consistent orientation when comparing blank and sample readings.

This is a capped screw-top cell for routine laboratory handling, not a stated pressure-rated or gas-tight vessel. No settled nominal capacity or minimum working volume is established for this exact sales record, so methods that depend closely on fill level or beam position should be checked in the actual holder.

First-use check

Inspect both cuvettes and closures for chips, dust or packing residue.
Rinse with a cleaning liquid suitable for your method and the complete assembled cell.
Place one cuvette in the holder and check seating and top clearance around the closure.
Run a blank to confirm beam coverage and thread fit before routine use.

Fit and optical alignment

The confirmed optical geometry for this item is the 10 mm path with Two-Way Light transmission through opposite faces. That is the key fit point for optical setup selection.

External dimensions and Z Height are not established for this exact SKU. If your holder has limited top clearance, fixed beam height or a strict seating geometry, confirm those points in the instrument rather than assuming interchangeability from path length alone.

Handling and cleaning

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials, and wipe optical faces gently with non-abrasive optical tissue after rinsing.

The exact chemical limits of this cell-and-closure assembly are not established here. If your sample, rinse solvent or cleaning routine is chemically demanding, check compatibility for the complete cuvette and PTFE closure arrangement. For general fabrication background, see Compare fabrication options.

Included with this option

One sales pack of 2 JGS1 quartz screw-top cuvettes. PTFE closures are included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation.

Discuss your requirements and quote part number C102TR5.