(C102SR20) Quartz Micro Cuvette, 10 mm Path, 1.4 mL

Weight	30 g

SKU: C102SR20

Original price was: $143.00.Current price is: $129.00.

In Stock

C102SR20 is a JGS1 quartz micro cuvette with a 10 mm optical path, Two-Way Light layout and 1.4 mL nominal capacity. Its covered sample chamber and 4 mm sample-region width suit users who want a compact quartz cell with simple two-window optical access and more volume than narrower micro formats. Sold as 1 cuvette per price unit.

In Stock

SKU: C102SR20 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102SR20 is a JGS1 quartz micro cuvette with a 10 mm optical path, Two-Way Light geometry and 1.4 mL nominal capacity. The covered sample chamber helps during filling and handling, while the 4 mm sample-region width is useful to consider when matching the beam to the illuminated liquid area. This option suits users who want a compact quartz cell with a simple two-window optical layout rather than multi-direction access.

Path Length: 10 mm
Sample Volume (Nominal): 1.4 mL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	4 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.4 mL
External Dimensions	12.5 × 12.5 × 45 mm
Body Height	45 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Stopper
Closure Included	Yes
Detection Channel Width	4 mm

Choose this option

Choose this cell when you need a covered micro cuvette with a standard 10 mm path and a larger nominal capacity than the narrower micro variants in the same general format. The Two-Way Light layout keeps the optical direction simple, and the 4 mm sample-region width gives a practical reference when planning beam coverage through the filled sample.

What makes this option different

10 mm optical path: standard transmission geometry in a compact micro body.
Two-Way Light layout: optical access through two opposed faces rather than a multi-side format.
1.4 mL nominal capacity: more sample volume than smaller slit micro versions.
4 mm sample-region width: a useful sizing point for beam coverage and fill planning.
Covered format: closure included, with 1 cuvette sold per price unit.

Using this cell

Fill the cuvette so the beam passes fully through liquid and remove visible bubbles before measurement. Keep the optical faces clean, and use the same seating and orientation for blank and sample runs to keep the optical path consistent.

The 1.4 mL value is the nominal capacity, not a minimum working volume. If you plan to run with less sample, check in your own setup that the liquid level still covers the beam position you intend to use.

First-use check

Inspect the optical faces, rinse the cell with a suitable liquid for your method, and check that the closure seats cleanly before first use. Then run a blank to confirm clear transmission, fill coverage and the absence of visible bubbles in the illuminated region.

Fit and optical alignment

The cell body is 12.5 × 12.5 × 45 mm with a 12.5 × 12.5 mm base. These dimensions help you check holder seating and general external clearance, but they do not provide a Z Height value.

This is a Two-Way Light cuvette with optical access through two opposite faces. If your spectrometer or holder uses a fixed beam height, confirm beam alignment before ordering because Z Height is not listed for this item.

Solvents and cleaning

This quartz cuvette is described with fused integrated construction. Product-specific chemical limits for this exact sale item are not listed here, so choose sample, rinse and cleaning liquids to match your own method conditions.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the exterior optical faces gently with non-abrasive optical tissue.

Included with this option

1 cuvette per listed price unit. Closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz projects for changes to dimensions, optical path length, sample volume, optical windows, Z Height, closures and other fit requirements. Send a dimensioned drawing or labelled sketch together with your holder details, sample conditions, target quantity and delivery timing. Discuss your requirements and quote part number C102SR20.