(C102CA1) Quartz Standard Cuvette, 10 mm Path, 3.5 mL

Weight	30 g

SKU: C102CA1

Original price was: $67.00.Current price is: $61.00.

In Stock

C102CA1 is a JGS1 quartz standard cuvette for UV/Vis work with a 10 mm optical path, Two-Way Light layout and 3.5 mL nominal capacity. It uses a standard rectangular body with an included closure for routine top filling and straight-through transmission measurements.

In Stock

SKU: C102CA1 Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CA1 is a JGS1 quartz standard cuvette for UV/Vis measurements that use a 10 mm optical path in a standard rectangular cell body. It combines Two-Way Light geometry with a 3.5 mL nominal capacity, making it suitable for routine straight-through transmission work where you want a familiar top-filled cuvette format.

The stated wavelength range is 190–2500 nm. The uncapped body measures 12.5 × 12.5 × 45 mm, which is the key size to check against your holder or instrument compartment before ordering.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Standard Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	190 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	3.5 mL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes

Choose this option

Choose C102CA1 when your method specifies a 10 mm quartz cuvette and you want the same specification. The open rectangular body is easy to fill from above, while the included closure helps keep the sample covered during handling. This format suits routine bench work, replacement needs and blank/sample preparation in the same cuvette style.

What makes this option different

10 mm optical path: match the measurement method to this transmission distance and align the beam through the sample region.
Two-Way Light: align the opposing optical faces with the transmission beam and use the same orientation for blank and sample readings.
3.5 mL nominal capacity: plan the working fill and beam footprint together so liquid covers the illuminated region; nominal capacity is not a minimum working fill.
Accompanying closure: cover the opening after preparation and allow room to remove it; no pressure or leak-tight rating is specified.

Using this cell

Fill each cuvette from the top so the liquid level covers the beam during measurement. Remove visible bubbles before use, and keep the same seating direction for blank and sample when your procedure depends on repeatable positioning.

The stated 3.5 mL is the nominal capacity of each cuvette, not a minimum working volume. Handle the non-optical sides where possible to keep the transmission faces clean.

First-use check

Inspect the cuvette for dust, residue or visible marks on the optical faces.
Check that the uncapped body seats correctly in your holder.
Run a suitable blank and confirm that the filled sample region aligns with the beam.

Fit and optical alignment

The stated external dimensions apply to the uncapped cell body: 12.5 × 12.5 × 45 mm. Use those dimensions for holder fit, body clearance and rack checks.

Z Height is not established for this SKU. If your instrument depends on a defined beam-center height or has limited vertical tolerance, confirm that requirement before ordering. The stated body size does not include closure height, so allow separate top clearance if you use the closure in place.

Solvents and cleaning

Compare cuvette fabrication methods if chemical conditions are important in your selection. The exact chemical limits of this complete assembly are not established here, so check suitability before using aggressive chemicals, elevated temperatures or extended contact times.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning, and clean the optical faces gently with a non-abrasive laboratory wipe or optical tissue.

Included with this option

This configuration includes an accompanying closure. Confirm the cell quantity and any separately specified accessories covered by your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

For changes involving dimensions, optical path length, sample volume, optical windows, Z Height or closures, send your drawing or labelled sketch together with holder or instrument details through the contact page and quote part number C102CA1. Feasibility, quantity, price and timing are confirmed case by case.