(C102CS2) Quartz Standard Cuvette, 10 mm Path, 3.5 mL

Weight	30 g

SKU: C102CS2

Original price was: $19.00.Current price is: $18.00.

In Stock

C102CS2 is a JGS1 quartz standard cuvette for UV/Vis spectroscopy with a 10 mm optical path, 3.5 mL nominal capacity and a covering lid. It is intended for neutral samples and is sold as a pack of two cuvettes.

In Stock

SKU: C102CS2 Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CS2 is a JGS1 quartz standard cuvette for UV/Vis work across a stated 190–2500 nm range. It combines a 10 mm optical path with a 3.5 mL nominal capacity in a familiar rectangular format, and the supplied lid covers the open sample chamber during routine filling and handling.

This option is intended for neutral samples. That makes it suitable for methods that need a standard 10 mm quartz cell and straightforward top access, while keeping sample chemistry within the stated neutral-use restriction.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Standard Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	190 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	3.5 mL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes

Choose this option

Choose C102CS2 when you need a standard rectangular quartz cuvette for a 10 mm UV/Vis method and your sample conditions stay neutral. The open top allows direct pipette filling, the lid provides simple top coverage during bench handling, and the listed sale unit is a pack of two cuvettes.

What makes this option different

10 mm optical path for methods specified around the common full-size cuvette path length.
3.5 mL nominal capacity for routine liquid loading in a standard rectangular cell.
Lid included so the open chamber can be covered after filling or during transfer.
Neutral-sample restriction for method selection and cleaning choice.
JGS1 quartz body for UV/Vis use over the stated 190–2500 nm range.
Sold as a pack of two cuvettes for the current MQ listed price unit.

Using this cell

Fill the cell so the liquid fully covers the beam area used by your instrument. For consistent day-to-day measurements, keep the same orientation for blank and sample, avoid bubbles on the optical faces, and handle the cell by the non-optical sides where possible.

The lid is a top cover for routine handling after filling. The stated 3.5 mL is a nominal capacity, not a minimum working volume, so your actual fill level should suit your instrument beam position and method setup.

First-use check

Inspect the optical faces and edges for chips, residue or visible marks.
Test fit the empty cell in your holder and make sure it sits squarely.
Rinse with a suitable neutral liquid for your method, then run a blank before measuring samples.

Fit and optical alignment

The stated external size is 12.5 × 12.5 × 45 mm for the uncapped cell body. Use that body size when checking holder seating and vertical clearance around the cuvette position, especially if the holder area is tight above the cell.

Z Height is not stated for this listing. If your holder or instrument depends on a defined beam-center height, confirm that requirement before ordering rather than treating the standard rectangular body as proof of fit.

Solvents and cleaning

This cuvette is restricted to neutral samples. Match both your sample and your cleaning routine to that condition, and avoid using it for more aggressive chemistry.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the exterior optical faces gently with non-abrasive optical tissue. For broader background on fabrication approaches, see Compare fabrication methods.

Included with this option

2 cuvettes per listed price unit. Lid included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and tolerance needs. Send a dimensioned drawing or labelled sketch together with your instrument or holder details, sample conditions and target quantity via our contact page, and quote part number C102CS2.