(C102SS14) Quartz Cylindrical Cell, 10 mm Path, 2.8 mL

Weight	30 g

SKU: C102SS14

Original price was: $323.00.Current price is: $291.00.

In Stock

C102SS14 is a quartz cylindrical cell with a 10 mm optical path, 2.8 mL nominal capacity and an M12 threaded sample opening. Its round 22 mm body and 18 mm inner diameter suit setups built around cylindrical sample chambers rather than square cuvettes. Supplied as 1 cell.

In Stock

SKU: C102SS14 Categories: Cuvettes, Products, Quartz Cylinder Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102SS14 is a quartz cylindrical cell with a 10 mm optical path and a 2.8 mL nominal capacity in a round-body format. The 18 mm inner diameter gives direct access for filling and cleaning, while the M12 threaded opening helps you identify the closure style used on this selected version and plan space around the sample-access area.

Path Length: 10 mm
Sample Volume (Nominal): 2.8 mL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Cylindrical Cell
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Sample Volume (Nominal)	2.8 mL
External Dimensions	22 × 12.5 × 38 mm
Uncapped Cell Dimensions	22 × 12.5 × 38 mm
External Dimensions Scope	Uncapped Cell
Overall Height with Closure	42 mm
Outer Diameter (OD)	22 mm
Inner Diameter (ID)	18 mm
Material	Quartz
Closure Type	Screw Cap
Closure Thread	M12

Choose this option

Choose C102SS14 when you need a cylindrical quartz cell with a 10 mm path and a larger round chamber for routine liquid loading. It is a practical option when your holder is designed for cylindrical bodies and when top access and internal chamber width matter as much as the optical path itself.

What makes this option different

10 mm optical path for methods set up around this path length.
2.8 mL nominal capacity with an 18 mm inner diameter round chamber.
M12 threaded opening at the sample-access point on this selected version.
22 mm outer diameter with 38 mm uncapped span and 42 mm assembled height for clearance planning.

Using this cell

Load the sample through the top opening and make sure the optical region is clean and fully covered before measurement. For repeatable work, keep the cell orientation consistent in the holder and check for bubbles, droplets or residue in the light path before reading.

The nominal capacity is 2.8 mL. It is not a stated minimum working volume, so if your method depends on low fill levels or a defined beam position, verify the liquid coverage in your actual setup before regular use.

First-use check

Inspect the optical faces and opening for dust or packing residue.
Rinse with a cleaning liquid suitable for your application.
Run a blank or reference liquid in the intended holder to confirm stable seating and beam coverage before measuring samples.

Fit and optical alignment

This is a cylindrical cell, not a standard square cuvette body. The main fit points are the 22 mm outer diameter, the 18 mm inner diameter and the fact that the source dimensions separate the uncapped body from the assembled height.

Use 38 mm as the uncapped span and 42 mm as the assembled height for clearance checks around the holder and instrument cover. Z Height is not established for this item, so instrument fit should be checked against your beam geometry rather than assumed from the 10 mm path length.

Solvents and cleaning

Quartz is widely used in optical laboratory work, but the chemical limits of this exact assembly are not established here. If your samples or cleaning routine involve aggressive chemicals, mixed solvents, elevated temperature or long contact time, please check suitability before use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials, and clean optical surfaces gently with non-abrasive optical tissue. General fabrication background is available here: https://machinedquartz.com/fabrication-method-of-cuvettes/.

Included with this option

Supplied as 1 cylindrical cell. Additional included components are not listed for this option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different cylindrical-cell geometry, we can review custom quartz versions for dimensions, optical path length, sample volume, openings and holder-related fit details. Send your drawing or labelled sketch together with holder information, critical dimensions, sample conditions and target quantity via https://machinedquartz.com/contact/.