(C022SS) Quartz Cylindrical Cell, 2 mm Path, 560 µL

Weight	30 g

SKU: C022SS

Original price was: $323.00.Current price is: $291.00.

In Stock

C022SS is a JGS1 quartz cylindrical cell with a 2 mm optical path, 560 µL nominal capacity and an included closure. Its round 22 mm outer-diameter body suits holders built for cylindrical cells rather than square cuvettes. Supplied as 1 cell.

In Stock

SKU: C022SS Categories: Cuvettes, Products, Quartz Cylinder Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C022SS is a JGS1 quartz cylindrical cell for UV/Vis work across the stated 200–2500 nm range. It combines a 2 mm optical path with a 560 µL nominal capacity in a round-body format, and it is supplied with a closure for covered sample handling. This option is useful when you need a cylindrical cell shape as well as a defined short path length.

Path Length: 2 mm
Sample Volume (Nominal): 560 µL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Cylindrical Cell
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	2 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	560 µL
External Dimensions	22 × 4.5 × 33 mm
Uncapped Cell Dimensions	22 × 4.5 × 33 mm
External Dimensions Scope	Uncapped Cell
Overall Height with Closure	37 mm
Outer Diameter (OD)	22 mm
Inner Diameter (ID)	18 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Stopper
Closure Included	Yes
Fabrication Method	Molded 83

Choose this option

Choose C022SS when your holder or accessory is built around cylindrical cells and your method calls for a 2 mm path instead of a standard square cuvette body. The supplied closure adds a covered setup for loading and measurement, while the compact round chamber keeps the format consistent with round-cell fixtures.

What makes this option different

2 mm optical path for methods that require a fixed short path length.
Round cylindrical body with a 22 mm outer diameter for holders designed for this cell format.
560 µL nominal capacity in a compact quartz sample chamber.
Closure included for covered sample handling, with overall height increasing from 33 mm uncapped to 37 mm with the closure fitted.

Using this cell

Load the sample carefully and keep the optical region consistently filled for your measurement. Fit the supplied closure when your procedure calls for covered handling, then keep the same orientation for blank and sample readings.

The nominal capacity is 560 µL. It is not a stated minimum working volume, so if you plan to run partial fills or your method depends on a specific beam position, check the actual filled condition in your instrument before routine use.

First-use check

Rinse with a cleaning liquid that suits your method and sample chemistry.
Inspect the optical faces under good light for residue, chips or scratches.
Seat the cell in the holder and run a blank at your working wavelength before measuring samples.
Check that the closure can be used without interfering with the instrument lid or accessory cover.

Fit and optical alignment

This is a cylindrical cell, not a standard square cuvette body. Check that your holder accepts a 22 mm outer diameter and that the available height suits both the 33 mm uncapped cell and the 37 mm height with the closure in place.

Z Height is not stated for this item. If your instrument has a fixed beam-center position, verify beam alignment against the actual sample region before ordering or before first use.

Solvents and cleaning

Molded 83 is the listed fabrication method for this quartz cell. Choose cleaning and sample conditions that are suitable for the complete wetted assembly used in your procedure.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

Supplied as 1 cylindrical cell with closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different cylindrical-cell specification, send a dimensioned drawing or labelled sketch together with your holder or instrument information, working wavelength, sample conditions and target quantity. Changes to dimensions, optical path length, sample volume, optical windows, Z Height, closures or fabrication details are quoted separately from the listed SKU. Discuss your requirements and quote part number C022SS.