(C022WS3) Quartz Flow Cell, 2 mm Path, 120 µL

Weight	30 g

SKU: C022WS3

Original price was: $285.00.Current price is: $257.00.

In Stock

C022WS3 is a quartz flow cell for UV/Vis work with a 2 mm optical path, Two-Way Light transmission and a 120 µL nominal capacity. Two top M6 fluid connections keep tubing access above the cell body. This listing is for the selected C022WS3 flow cell specification.

In Stock

SKU: C022WS3 Categories: Cuvettes, Products, Quartz Flow Cells Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C022WS3 is a quartz flow cell for UV/Vis spectroscopy with a 2 mm optical path and 120 µL nominal capacity. It uses a compact body with two top M6 fluid connections, so the tubing approach stays above the cell while the opposing optical faces remain available for transmission measurement.

The body itself measures 12.5 × 12.5 × 35 mm, and the stated optical window area is 17.5 × 3.5 mm. This option suits setups that need a 2 mm flow path in a small upright format, without moving to a larger cell body just to gain the stated path length.

Path Length: 2 mm
Sample Volume (Nominal): 120 µL
Opening Configuration: Two Top Fluid Connections

Selection Specifications

Product Kind	Flow Cell
Cell Type	Flow Cell
Measurement Mode	UV/Vis Spectroscopy
Path Length	2 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	17.5 × 3.5 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	120 µL
Cell Body Dimensions	12.5 × 12.5 × 35 mm
Body Height	35 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Port Count	2
Port Thread	M6
Fabrication Method	Standard 80
Opening Configuration	Two Top Fluid Connections
Fitting Material	PTFE

Choose this option

Choose C022WS3 when your UV/Vis method is designed around a 2 mm transmission path and top-entry fluid routing. The 120 µL nominal capacity helps you plan the cell section of the flow path, while the compact body and top-port layout can be easier to accommodate where side-mounted tubing would interfere with the holder or optical space.

What makes this option different

2 mm optical path: suited to methods set up around this transmission length.
120 µL nominal capacity: a defined cell sample-region volume for flow-path planning.
Two top M6 fluid connections: tubing and connection hardware approach from above the cell body.
Two-Way Light layout with a 17.5 × 3.5 mm window area: direct transmission through the main opposing optical faces.

Using this cell

Connect the flow lines to the two top ports and fill the cell gradually so the illuminated sample zone wets fully. During initial setup and when changing method liquids, inspect the optical region for trapped bubbles or residue before you record measurements.

The stated 120 µL is the nominal capacity of the cell itself. It does not include the volume of connected tubing, fittings or other parts of the fluid circuit, so total priming and rinse volume should be planned from the complete assembly. No pressure rating is stated here.

First-use check

Inspect the body, optical faces and port threads for damage or contamination before installation.
Confirm that your tubing and connection hardware seat correctly at both top ports.
Run a suitable blank through the cell and check for visible bubbles in the optical region before measurement.

Fit and optical alignment

The listed 12.5 × 12.5 × 35 mm dimensions apply to the cell body only. Leave extra space above the body for the M6 connections, attached tubing and bend radius, because the installed height and full envelope depend on the hardware used and are not stated here.

Z Height is not provided for this cell. If your holder or instrument depends on a defined beam-center height, check that requirement before ordering. Two-Way Light means transmission through opposing optical faces; it should not be read as a claim of fit for a particular instrument.

Solvents and cleaning

This cell uses Standard 80 adhesive-bonded quartz construction. Standard 80 is commonly selected for room-temperature water-based samples and buffers. Avoid organic samples and organic cleaning solvents with this adhesive-bonded cell.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with non-abrasive laboratory tissue or another suitable non-scratching method, and check chemical suitability for the full wetted flow path under your actual sample and cleaning conditions.

Included with this option

The listed price is for one C022WS3 flow cell.

Additional accessory contents should be confirmed for your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom quartz flow-cell projects for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, and tolerance requirements. Send a dimensioned drawing or labelled sketch together with your holder details, application wavelength, liquid conditions and target quantity. Discuss your requirements and quote part number C022WS3.