(C022TS1) Quartz Screw-Top Cuvette, 2 mm Path, 700 µL, Pack of 2

Weight	30 g
Dimensions	1.25 × 0.45 × 5.5 mm

SKU: C022TS1

Original price was: $371.00.Current price is: $334.00.

In Stock

C022TS1 is a quartz screw-top cuvette for UV/Vis spectroscopy with a 2 mm optical path, Two-Way Light layout and 700 µL nominal capacity. Its compact rectangular body and included screw caps suit covered sample handling in a short-path format. Supplied as a pack of 2 cuvettes.

In Stock

SKU: C022TS1 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C022TS1 is a quartz screw-top cuvette for UV/Vis spectroscopy with a 2 mm optical path and 700 µL nominal capacity. This option combines a straight-through Two-Way Light layout with a threaded opening and included caps, making it useful when you want a short-path quartz cell that can be handled as a covered sample container between filling and measurement. It is supplied as a pack of 2 cuvettes.

Path Length: 2 mm
Sample Volume (Nominal): 700 µL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	Pack of 2
Path Length	2 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	700 µL
Cell Body Dimensions	4.5 × 12.5 × 35 mm
Overall Height without Closure	55 mm
Body Height	35 mm
Base Dimensions	4.5 × 12.5 mm
Material	Quartz
Closure Type	Screw Cap
Closure Included	Yes

Choose this option

Choose C022TS1 when your method calls for a 2 mm path and you want the convenience of a capped quartz cell rather than an open-top format. The 700 µL nominal capacity gives a compact sample chamber for this geometry, while the pack-of-two sale unit is practical for blank-and-sample work, duplicate runs or keeping a spare matched format on hand.

What makes this option different

2 mm optical path for UV/Vis methods built around a short transmission length.
Two-Way Light layout for straight-through measurement across the defined path.
Screw-top format with caps included for covered handling of filled samples.
Pack of 2 cuvettes for paired routine use or replacement stock in the same format.

Using this cell

Fill the cuvette so the liquid fully covers the beam area during measurement, then seat the cap carefully. Before running samples, remove visible bubbles from the optical region and keep the same cell orientation for blank and sample when your method depends on consistent positioning.

Handle the cell by the non-optical surfaces and keep the clear faces free from fingerprints and residue. The covered format is useful during transfer and routine bench handling, but no pressure rating is stated for this item, so it should not be selected for pressure service.

First-use check

Inspect each cuvette and cap for chips, cracks, dust or residue.
Rinse with a cleaning liquid suitable for your method before first use.
Test fit the cell in your holder and confirm secure seating and cap clearance.
Run a blank in the same orientation planned for the sample.

Fit and optical alignment

The listed optical body dimensions are 4.5 × 12.5 × 35 mm, with an uncapped overall height of 55 mm. These figures help you check holder width, base support and the free space available around the neck area.

The full capped envelope is not listed here, and Z Height is not stated for this SKU. If your instrument, adapter or compartment lid depends on a defined beam-center position or precise top clearance, those points should be checked before ordering.

Solvents and cleaning

Quartz is specified for this cell, but the chemical limits of the complete assembly are not stated here. Choose sample and cleaning liquids with the full cell and closure together in mind, especially for aggressive chemicals, longer contact times or elevated temperatures.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue. For general fabrication background, see the fabrication overview.

Included with this option

Supplied as 2 quartz screw-top cuvettes. Screw caps are included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a related quartz cuvette with different dimensions, path length, sample volume or closure details, send your drawing or labelled sketch together with your holder or instrument information. To discuss a project, use Discuss your requirements and quote part number C022TS1.