Site Navigation

(MQQFC114) JGS1 Quartz Flow Cell, 0.2 mm Path, 120 µL, Same-Face Ports

Weight50 g
SKU: MQQFC114

$773.00

In Stock

JGS1 quartz UV/Vis flow cell with a 0.2 mm optical path, 120 µL nominal capacity and two tube connections on the same broad face. Each tube has 5 mm OD / 4 mm ID for connections approaching from one side. Supplied as one cell.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC114 is a JGS1 quartz flow cell with 0.2 mm optical path and 120 µL nominal capacity. Both tube connections project from the same broad face, rather than requiring access to opposite sides of the cell. Its 20 × 2.7 × 40 mm body and 5 mm OD / 4 mm ID tubes should be checked separately when planning the measurement region and fluid connections.

View the English selection reference.

Path Length
0.2 mm
Sample Volume (Nominal)
120 µL
Opening Configuration
Two Fluid Tubes on the Same Face

Selection Specifications

Product KindFlow Cell
Cell TypeFlow Cell
Measurement ModeUV/Vis Spectroscopy
Path Length0.2 mm
Light Transmission ConfigurationTwo-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)120 µL
External Dimensions20 × 2.7 × 40 mm
Cell Body Dimensions20 × 2.7 × 40 mm
External Dimensions ScopeBody Only
Internal Dimensions16 × 0.2 × 38 mm
MaterialQuartz
Material GradeJGS1
Port Count2
Tube Outer Diameter (OD)5 mm
Tube Inner Diameter (ID)4 mm
Fabrication MethodMolded 83
Opening ConfigurationTwo Fluid Tubes on the Same Face
Port LayoutLeft tube on the lower part of the same broad face as drawn; Right tube on the lower part of the same broad face as drawn
Pack Quantity1 Piece
Package Contents1 × Quartz Flow Cell

Choose this option

Choose this thin-path cell when your UV/Vis method calls for 0.2 mm transmission and both liquid connections need to approach from the same broad face. The 16 × 0.2 × 38 mm internal channel and 120 µL nominal capacity define this small measuring region.

What makes this option different

  • 0.2 mm specified optical path.
  • 120 µL nominal capacity.
  • Both tube connections project from the same broad face, rather than requiring access to opposite sides of the cell.
  • 5 mm OD / 4 mm ID tube connection dimensions.

Structure and dimensions

MQQFC114 body and connection dimensions; allow separate clearance for the projecting tubes.
MQQFC114 body and connection dimensions; allow separate clearance for the projecting tubes.Open image ↗

Using this cell

Align the 0.2 mm transmission path with your instrument beam and keep the installed position consistent for blank and sample measurements.

Support the body during installation and relieve strain from the connected tubing. Fill and flush carefully, checking that the illuminated region is covered and free of bubbles. The 120 µL value is nominal capacity, not a minimum working-volume specification; external tubing and connectors hold additional liquid.

First-use check

  1. Inspect the optical region, body and tube ends.
  2. Test holder support and connection clearance before introducing liquid.
  3. Run a method blank after bubble removal in the final installed position.

Fit and optical alignment

The 20 × 2.7 × 40 mm dimensions describe the rectangular cell body. The two tubes project from the same broad face and need separate clearance. The source marks the port-centre distance to the adjacent edges as 5 mm; this connection location is separate from an optical beam-centre height.

A Z Height is not specified for this option. Compare your beam position and footprint with the mounted optical region. Send any pressurized-system requirements for assessment of the complete cell, connections and operating conditions before use.

Solvents and cleaning

Molded 83 is the MQ fabrication option for this cell, generally selected for organic-solvent methods or temperature-controlled work. Review the complete wetted assembly, including tubing and any connectors, for your liquid, concentration, temperature and contact time.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean exterior optical faces gently with suitable non-abrasive optical tissue.

Included with this option

One MQQFC114 quartz flow cell. The listed price is for one cell.

Availability and ordering

Contact us to check current availability and dispatch timing when a delivery date matters to your work. Preparation or production, carrier transit and customs clearance are separate considerations.

Discuss a custom version

We can review changes to optical path, chamber geometry, tube position or connection dimensions. Send your requirements with SKU MQQFC114, a drawing or holder details, liquid conditions and quantity.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC114) JGS1 Quartz Flow Cell, 0.2 mm Path, 120 µL, Same-Face Ports”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare