(MQQFL012) Quartz Screw-Top Cuvette, 0.1 mm path, Very Short Path with Large Screw Opening
$1,128.00
JGS1 quartz screw-top cuvette with a 0.1 mm optical path, Four-Way Light geometry and 35 µL nominal capacity for UV/Vis work. The single M10 threaded neck gives top filling access in a very short-path upright cell. The listed price is for 1 piece with an accompanying closure. Molded 83.
Description
MQQFL012 is a JGS1 quartz screw-top cuvette for UV/Vis measurements with a 0.1 mm optical path, Four-Way Light optical access and 35 µL nominal capacity. It combines a very short path with a single M10 threaded neck, giving direct top access in a compact upright cell format. This sales option is supplied as 1 piece with an accompanying closure.
- Path Length
- 0.1 mm
- Sample Volume (Nominal)
- 35 µL
- Opening Configuration
- Single Threaded Neck
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 0.1 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 35 µL |
| External Dimensions | 12.5 × 2.6 × 35 mm |
| Body Height | 35 mm |
| Overall Height with Closure | 58 mm |
| Base Dimensions | 12.5 × 2.6 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Screw Cap |
| Port Thread | M10 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Single Threaded Neck |
| Closure Thread | M10 |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Screw-Top Cuvette; Accompanying closure |
Choose this option
Choose MQQFL012 when your method requires a very short 0.1 mm path and you prefer a capped sample chamber instead of an open-top cell. The Four-Way Light layout gives optical access on multiple faces, while the threaded neck provides a defined opening for filling and closing. It is a useful choice when path length, small nominal capacity and top-access handling all matter in the same cell.
What makes this option different
- 0.1 mm optical path for very short-path UV/Vis measurements.
- 35 µL nominal capacity in a compact upright sample chamber.
- Four-Way Light geometry for optical access on four sides of the quartz body.
- Single M10 threaded neck with accompanying closure for top filling and capped handling.
Using this cell
Fill the cell through the threaded neck and make sure the sample fully covers the illuminated region before measurement. With a path this short, bubbles, droplets and residue can affect the reading more easily than in a longer-path format, so inspect the sample zone carefully after filling.
Keep the same orientation for blank and sample runs, especially if your setup depends on a fixed optical direction. If you work close to the nominal 35 µL capacity, check the practical fill level in your own holder because minimum working volume is not established here.
First-use check
- Inspect the optical faces, sample chamber and neck area for contamination or handling marks.
- Test fit the cell in your holder and verify beam position with a suitable blank.
- After filling, remove bubbles and exterior droplets before the first measurement.
Fit and optical alignment
View the English selection reference.
The bare optical body is 12.5 × 2.6 × 35 mm, while the overall height with cap is 58 mm. Check both holder clearance and vertical access for fitting or removing the closure, because the body dimensions do not represent the full assembled envelope.
Z Height is not established for this SKU, so instrument fit should be checked against your holder and beam position before ordering. The M10 thread is the closure connection at the neck, not a pressure-rated fluid fitting.

Solvents and cleaning
Molded 83 is commonly selected for methods that may involve organic solvents or heated measurement conditions. Suitability for this assembled cell still depends on the actual liquid, concentration, temperature, contact time and the complete body-and-closure combination.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods, and clean the exterior optical faces gently with non-abrasive optical tissue.
Included with this option
1 Quartz Screw-Top Cuvette and accompanying closure. The listed price is for 1 piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving path length, capacity, external envelope, optical windows, closure details and tolerances. If you need a modified version, send your drawing or holder details, sample conditions and required quantity.
Send a product-selection enquiry with SKU MQQFL012.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.















Reviews
There are no reviews yet.