Site Navigation

(MQQFC036) Quartz Rectangular Sample Cell, 20/10 mm Dual Path, 10 mL, Open at Both Ends

Weight54 g
SKU: MQQFC036

$408.00

In Stock

JGS1 quartz rectangular sample cell with dual 20/10 mm optical paths, Four-Way Light access and 10 mL nominal capacity. The open-at-both-ends body lets you use either stated beam direction in your own holder or sealing arrangement. Supplied as 1 piece.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC036 combines two stated optical path directions, 20 mm and 10 mm, in one JGS1 quartz rectangular sample cell. Its Four-Way Light layout gives optical access from four sides, so the same body can be used in either of the specified beam orientations when your fixture supports that arrangement. The cell is open at both ends and has a 10 mL nominal capacity.

Path Length
20 mm / 10 mm (dual path)
Sample Volume (Nominal)
10 mL
Opening Configuration
Open at Both Ends

Selection Specifications

Product KindSpecialized Cell
Cell TypeRectangular Sample Cell
Measurement ModeTransmission Spectroscopy
Path Length20 mm / 10 mm (dual path)
Light Transmission ConfigurationFour-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)10 mL
External Dimensions22 × 12 × 52 mm
Body Height52 mm
Base Dimensions22 × 12 mm
Internal Dimensions20 × 10 × 52 mm
MaterialQuartz
Material GradeJGS1
Fabrication MethodMolded 83
Opening ConfigurationOpen at Both Ends
Pack Quantity1 Piece

Choose this option

Choose MQQFC036 when you want one rectangular cell body that supports two defined path directions instead of a single fixed path. This format is useful when your method, holder or optical setup needs flexibility between the 20 mm and 10 mm directions, while still using the same chamber body and overall outer dimensions.

View the English selection reference. Also available in the product gallery. Group photographs illustrate other options in the series.

What makes this option different

  • Dual 20/10 mm path directions allow one cell body to be used in two stated optical orientations.
  • Four-Way Light configuration gives optical access from four sides of the rectangular body.
  • 10 mL nominal capacity provides a larger chamber format than micro-volume cells.
  • Open at both ends leaves filling, retention and sealing to your own fixture or assembly.

Structure and dimensions

Product dimensions for checking holder clearance and sample access.
Product dimensions for checking holder clearance and sample access.Open image ↗

Using this cell

Mount the cell with the intended beam direction clearly identified, and keep the same orientation for blank and sample measurements. If your procedure uses the 20 mm direction in one method and the 10 mm direction in another, document that orientation in the setup so the selected path remains consistent.

The nominal 10 mL capacity describes the chamber volume, not the minimum working fill. Actual working volume depends on how the cell is supported and sealed in your holder, and on any additional parts added around the supplied quartz body.

First-use check

  1. Inspect all optical faces, end edges and open ends before installation.
  2. Mount the cell and verify beam position for the specific path direction you plan to use.
  3. For liquid use, confirm that your sealing and filling method retains the sample properly and leaves the optical path free of bubbles.

Fit and optical alignment

Use the 22 × 12 × 52 mm outer dimensions to check holder clearance. The 20 × 10 × 52 mm internal dimensions explain the chamber shape and the two stated path directions, but they do not establish beam-center height for your instrument.

Z Height is not listed for this model. If your setup depends on a defined beam height, confirm that from the mounted geometry rather than assuming it from overall body height alone.

English selection reference
Selection reference ↗

Solvents and cleaning

This cell uses Molded 83 construction. That fabrication is commonly selected for organic-solvent methods and heated applications, but the complete setup should be reviewed as an assembly if you add seals, fittings or support materials around the cell.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean optical faces gently with non-abrasive optical tissue and a cleaning liquid suitable for your method.

Included with this option

1 rectangular sample cell, SKU MQQFC036. The listed price is for one piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to path length, dual-path geometry, body dimensions, capacity, closures or connection details. Send your drawing or holder details, critical dimensions, sample conditions and required quantity through our contact page.

Additional information

Weight54 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC036) Quartz Rectangular Sample Cell, 20/10 mm Dual Path, 10 mL, Open at Both Ends”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare