(MQQFC025) Quartz Rectangular Sample Cell, 2.5 mm Path, 2 mL, Open at Both Ends
Description
MQQFC025 is a JGS1 quartz rectangular sample cell for setups that need a 2.5 mm optical path in a long open chamber. Its 2 mL nominal capacity and open-at-both-ends format make it useful when the cell body is only one part of the assembly and the holder, seals or fluid handling are provided separately. This is a body for integration, not a finished connected flow cell.
- Path Length
- 2.5 mm
- Sample Volume (Nominal)
- 2 mL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 2.5 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 2 mL |
| External Dimensions | 25 × 10.5 × 50 mm |
| Body Height | 50 mm |
| Base Dimensions | 25 × 10.5 mm |
| Internal Dimensions | 19 × 2.5 × 50 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
Choose MQQFC025 when you need a rectangular quartz cell with a defined 2.5 mm transmission path and a full-length open chamber that can be built into your own fixture. The long internal format is useful when your setup depends on custom end support, custom sealing or a specific sample-handling arrangement outside the cell itself.
What makes this option different
- 2.5 mm optical path: suited to methods that require this transmission distance across the sample.
- Open at both ends: the cell can be built into a separate holder or sealing arrangement instead of arriving as a ready-connected assembly.
- Long internal chamber: the 19 × 2.5 × 50 mm inner dimensions give a full 50 mm sample region through the body.
- 2 mL nominal capacity: useful for planning chamber fill, while the retained amount in your final setup depends on how the ends are sealed and supported.
Structure and dimensions

Using this cell
Install the cell so the measuring beam crosses the 2.5 mm path in the intended direction. Keep that orientation consistent for blank and sample measurements, especially if your holder has a fixed support geometry.
Because both ends are open, define the filling, sealing and draining method in the final fixture before routine use. Treat the stated 2 mL as nominal chamber capacity rather than minimum working volume.
First-use check
- Inspect the optical faces and end openings for chips, residue or handling marks.
- Test the fit in the holder before introducing sample.
- Run a blank in the final orientation and check that bubbles and exterior droplets are cleared before measurement.
Fit and optical alignment
Use the 25 × 10.5 × 50 mm outer size to check holder clearance, support width and end access. The 19 × 2.5 × 50 mm inner dimensions describe the sample chamber and should not be used as the holder opening size.
Z Height is not listed for this cell, so beam-height matching should be set by your fixture design rather than assumed from the outside dimensions alone. Clamp the body evenly and avoid point loading on optical faces or end edges.

Solvents and cleaning
Standard 80 is an adhesive-bonded quartz construction typically chosen for routine room-temperature aqueous samples and buffers. Avoid organic samples and organic cleaning solvents with this bonded assembly. If your method involves organic solvents or heated processing, ask about a more suitable Sintered or Molded alternative before ordering.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with non-abrasive optical tissue and a mild cleaner suitable for the validated assembly use.
Included with this option
1 rectangular sample cell, SKU MQQFC025. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz projects for changes to dimensions, optical path length, sample volume, optical windows, Z Height, interfaces, fabrication and tolerances. Send a drawing or labelled sketch with the critical dimensions, holder details, sample conditions and target quantity.
Send a product-selection enquiry with SKU MQQFC025 if you need a different body size, a defined interface or a complete assembled solution.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.














Reviews
There are no reviews yet.