Site Navigation

(MQQFC095) Quartz Flow Cell, 10 mm Path, 32 µL, 8.5 mm Z Height

Weight160 g
SKU: MQQFC095

$179.00

In Stock

JGS1 quartz flow cell with a 10 mm optical path, 32 µL nominal capacity and 8.5 mm base-to-beam-centre height. The 2 mm optical opening is separate from the two top liquid connections. Standard 80 adhesive-bonded construction for routine room-temperature aqueous samples and buffers; one cell supplied.

In Stock
Add to Wishlist
Add to Wishlist
SKU: MQQFC095 Categories: , , Tags: ,
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC095 is a JGS1 quartz flow cell for UV/Vis measurements that need a 10 mm path in a compact flow-through format. Its 32 µL nominal capacity, 8.5 mm Z Height and two top quartz connections help when you need to match the cell to an existing holder, beam position and tubing layout rather than choosing by path length alone.

This version uses adhesive-bonded quartz construction and is classified as Standard 80. It is supplied as 1 piece.

Path Length
10 mm
Sample Volume (Nominal)
32 µL
Opening Configuration
Two Top Fluid Connections

Selection Specifications

Product KindFlow Cell
Cell TypeFlow Cell
Measurement ModeUV/Vis Spectroscopy
Path Length10 mm
Light Transmission ConfigurationTwo-Way Light
Z Height8.5 mm
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)32 µL
External Dimensions12.5 × 12.5 × 45 mm
Cell Body Dimensions12.5 × 12.5 × 35 mm
External Dimensions ScopeInstalled Assembly
Body Height35 mm
Base Dimensions12.5 × 12.5 mm
MaterialQuartz
Material GradeJGS1
Port Count2
Tube Outer Diameter (OD)3 mm
Tube Inner Diameter (ID)1 mm
Fabrication MethodStandard 80
Opening ConfigurationTwo Top Fluid Connections
Fitting MaterialQuartz
Port LayoutTop connection at the left in the referenced original; Top connection at the right in the referenced original
Pack Quantity1 Piece
Package Contents1 × Quartz Flow Cell

Choose this option

Choose MQQFC095 when your setup needs a 10 mm flow cell with a compact nominal volume and a defined beam-center height from the base. The 12.5 × 12.5 mm footprint and top-entry connection layout are useful where the holder is built around an upright cell body and side clearance is limited.

What makes this option different

The 2 mm opening is the optical aperture at the measurement region. It is not the bore of a liquid connection; compare the beam footprint and optical centre with your holder separately from the tubing connection.

  • 10 mm optical path in a compact flow-through cell format.
  • 32 µL nominal capacity for a small sample region within this path length.
  • 8.5 mm Z Height gives a stated bottom-to-beam-center reference for alignment checks.
  • Two top quartz connections with 3 mm OD and 1 mm ID define the connection size and clearance above the cell.

Using this cell

Install the cell upright and support the body rather than the projecting top connections. Fill the circuit gradually so the sample reaches the optical region without trapping bubbles, then run your blank under the same installed conditions used for measurement.

The 32 µL figure is a nominal cell volume, not a minimum working volume. Your total filled system volume will be higher once tubing and other inline parts are connected.

First-use check

  1. Inspect the optical faces and connection ends before installing the cell.
  2. Place the cell in the holder and verify that the beam aligns with the stated 8.5 mm Z Height.
  3. Run a blank after filling, then recheck for bubbles or exterior droplets in the optical area.

Fit and optical alignment

View the English selection reference.

The cell body is 12.5 × 12.5 mm with a 35 mm body height and a 45 mm overall height including the fixed top tubes. Compare the 8.5 mm Z Height with your instrument beam position, and leave room above the cell for tubing bends and connection access.

Two opposing optical faces describes the optical direction through the opposed measurement faces. It does not by itself establish fit in a particular instrument, so holder seating and beam position should be checked against your setup.

English selection reference
Selection reference ↗

Solvents and cleaning

This cell uses adhesive-bonded quartz construction and is classified as Standard 80. This type is generally used for room-temperature water-based samples and buffers.

Avoid organic sample solvents and organic cleaning agents with this construction. If your method involves organic solvents, aggressive liquids, elevated temperature or long contact times, a more suitable Sintered or Molded option may be needed. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaners, and clean the exterior optical faces gently with non-abrasive optical tissue.

Included with this option

1 Quartz Flow Cell. The listed price is for one cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz flow cells for changes to path length, capacity, body size, windows, Z Height and connection details. Send a product enquiry with SKU MQQFC095 together with your drawing or holder details, sample conditions and target quantity.

Additional information

Weight160 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC095) Quartz Flow Cell, 10 mm Path, 32 µL, 8.5 mm Z Height”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare