(C1001WS) Quartz Flow Cell, 100 mm Path, 20 mL

Weight	100 g

SKU: C1001WS

Original price was: $332.00.Current price is: $299.00.

In Stock

C1001WS is a JGS1 quartz cylindrical flow cell with a 100 mm optical path and 20 mL nominal capacity for UV/Vis spectroscopy. Its open-ended main tube and two side tubes suit setups that need a long round flow body with lateral fluid connections. This listing is for one flow cell.

In Stock

SKU: C1001WS Categories: Cuvettes, Products, Quartz Flow Cells Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C1001WS is a JGS1 quartz flow cell for UV/Vis work that uses a long 100 mm optical path in a cylindrical body. The round 19 mm body, open-ended main tube and two side-tube connections make this option useful when you need to plan the optical path, holder support and tubing route together rather than treating the cell as a simple straight tube.

Path Length: 100 mm
Sample Volume (Nominal): 20 mL
Opening Configuration: Open-ended Main Tube with Side Tubes

Selection Specifications

Product Kind	Flow Cell
Cell Type	Flow Cell
Measurement Mode	UV/Vis Spectroscopy
Path Length	100 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	20 mL
Body Height	100 mm
Outer Diameter (OD)	19 mm
Material	Quartz
Material Grade	JGS1
Port Count	2
Tube Outer Diameter (OD)	4 mm
Tube Inner Diameter (ID)	2 mm
Opening Configuration	Open-ended Main Tube with Side Tubes
Wall Thickness	1 mm

Choose this option

Choose C1001WS when your method needs a 100 mm path in a cylindrical quartz flow cell and your layout suits two lateral tube connections near the ends of the body. The 20 mL nominal capacity gives you a larger flow-cell volume to work with, while the open-ended main tube geometry is important if your fixture or surrounding hardware needs access around both ends of the cylinder.

What makes this option different

100 mm optical path in a cylindrical flow-cell format for long-path UV/Vis setups.
Open-ended main tube with two side tubes for a layout that combines axial body access with lateral fluid connections.
4 mm OD and 2 mm ID side tubes for planning tubing and connection fit.
19 mm outer diameter and 100 mm cylindrical body length for holder and compartment clearance checks.

Using this cell

Support the cell by its cylindrical body during installation, then connect your fluid lines to the two side tubes. Fill and flush gradually so the optical region is fully wetted before measurement, and clear visible bubbles before running a blank or sample.

The two side connections are physical ports, but no inlet or outlet direction is assigned. Set the flow direction to suit your own system layout. The 20 mL figure is the nominal cell volume, not the total liquid requirement of the full circuit once tubing and other connected parts are included.

First-use check

Inspect the quartz body and both side tubes for chips, cracks or residue after unpacking.
Check that your holder supports the round body securely without loading the side tubes.
Flush with a suitable blank and confirm the optical region is fully filled and bubble-free before measurement.

Fit and optical alignment

The stated body dimensions cover the cylindrical body itself: 19 mm outer diameter and 100 mm body length along the main axis. The projecting side tubes need their own clearance, so do not treat the body size alone as the full installed envelope.

Z Height is not stated for this model. If your holder or instrument depends on a defined beam-center height or a complete overall assembly size, check those points before ordering.

Solvents and cleaning

This cell is quartz, so do not use hydrofluoric acid. Avoid hot strong alkalis and abrasive cleaning, and clean optical surfaces gently with non-abrasive materials.

Chemical limits and pressure limits are not stated for this configuration. If your method involves demanding solvent exposure, extended contact time or pressurized flow, review the complete liquid path and operating conditions before ordering. For general background on MQ cuvette construction options, see this fabrication guide.

Included with this option

This listing is for one flow cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to dimensions, path length, volume and connection layout. Send a labelled sketch or drawing and identify the dimensions, holder clearances and connection details that matter in your setup. Discuss your requirements and quote part number C1001WS.