(MQQFC041) Quartz Rectangular Sample Cell, 6.5 mm Path, 7 mL, Open at Both Ends
Description
MQQFC041 is a JGS1 quartz rectangular sample cell with a 6.5 mm optical path in a larger open-through chamber. The Two-Way Light layout supports straight-through transmission across the defined path, while the body stays open at both ends for fixtures that handle filling, retention or end closure outside the cell itself. With a 7 mL nominal capacity and a 27.5 × 6.5 × 40 mm internal chamber, it suits setups that need more sample space than a micro-format cell.
- Path Length
- 6.5 mm
- Sample Volume (Nominal)
- 7 mL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 6.5 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 7 mL |
| External Dimensions | 30 × 9 × 40 mm |
| Body Height | 40 mm |
| Base Dimensions | 30 × 9 mm |
| Internal Dimensions | 27.5 × 6.5 × 40 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
Choose MQQFC041 when you need a rectangular quartz body with a fixed 6.5 mm transmission path and direct access through both ends of the sample region. This format is useful when the cell will sit inside a holder, clamp or other assembly that already defines how the sample is introduced, retained or sealed, and when you want a larger rectangular chamber rather than a small enclosed cuvette body.
What makes this option different
- Two-Way Light arrangement supports straight-through transmission across the 6.5 mm optical path, rather than side-access geometry for crosswise optical layouts.
- Open at both ends leaves the sample region accessible from either end for fixture-based filling, retention or assembly.
- 27.5 × 6.5 × 40 mm internal chamber gives a long rectangular sample region for methods that use a larger through-body volume.
- 7 mL nominal capacity suits work that does not need a micro-volume format, while keeping the defined 6.5 mm path.
- Powder-fused construction is the supplier’s construction term for this exact SKU, making it relevant when you are selecting among different quartz cell builds for a mounted laboratory setup.
- 30 × 9 × 40 mm outer body helps when planning holder clearance separately from the internal sample dimensions.
Structure and dimensions

Using this cell
Use the beam in the intended straight-through direction across the 6.5 mm path. Because the body is open at both ends, the practical filling and retaining method depends on the holder or end hardware used in your own setup.
The larger rectangular chamber can be helpful when your method needs a more accessible sample region than a narrow micro cell. Nominal capacity is 7 mL, but it should not be treated as a minimum working volume; beam coverage and fill condition need to be checked in the installed orientation.
First-use check
- Inspect the optical faces and end edges for chips, residue or handling marks.
- Place the body in the intended holder and confirm that it sits squarely without twisting or uneven clamping.
- Run a blank in the installed orientation to check beam position, fill coverage and bubble behaviour before routine measurements.
Fit and optical alignment
Check your holder against the 30 × 9 × 40 mm external dimensions. The internal 27.5 × 6.5 × 40 mm dimensions describe the sample chamber, not the outside fit, so holder support and chamber size should be reviewed separately.
Z Height is not listed for this SKU. If your instrument or fixture depends on a specific beam-center height, verify that alignment in the real mount rather than relying on the overall body height alone.

Solvents and cleaning
This quartz cell covers the listed 200–2500 nm range, but cleaning suitability in use depends on the complete mounted arrangement if you add separate seals or end parts. The supplier construction term for this SKU is powder-fused construction; for fabrication background, see MQ Cuvette Fabrication Glossary.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning materials, and clean the optical faces with suitable non-abrasive laboratory wipes.
Included with this option
1 rectangular sample cell, SKU MQQFC041. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes to path length, chamber dimensions, external dimensions or opening geometry. If your setup depends on a specific holder or end arrangement, send a dimensioned drawing or labelled sketch together with the critical dimensions, sample conditions and required quantity.
Send a product-selection enquiry with SKU MQQFC041 and your fixture or application details.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.