Quartz 10mm, Two-Way Light, Flow Cuvette, 440 ul, Standard 80, C102WS3
10%
USD$223.00 USD$201.00
Quartz 10mm flow cuvette, 440 ul, two-way light windows, 12.5 × 12.5 × 35 mm. Standard 80 fabrication, 190-2500 nm, SKU: C102WS3 Z dimension: 15 mm.
Add to Wishlist
Add to Wishlist
Description
The C102WS3 is a quartz flow cuvette with 10 mm path length and two-way light windows (two polished optical faces for standard UV-Vis absorbance geometry), holding 440 ul of sample. The cell measures 12.5 × 12.5 × 35 mm externally with an internal chamber of 10 × 10 × 33 mm. Inlet and outlet ports enable continuous sample flow for real-time monitoring applications. Fabricated using Standard 80 technique with precision-glued quartz construction, delivering >80% transmittance across the 190-2500 nm range. The quartz body is suitable for aqueous (water-based) solutions only. Do not use with organic solvents, strong acids, or strong bases. The Z dimension (beam center height) is 15 mm from the cell bottom — verify compatibility with your instrument’s beam height before ordering.
| Technical Specifications | |||
|---|---|---|---|
| Material | Quartz (Fused Silica) | SKU | C102WS3 |
| Type | Flow Cuvette | Path Length | 10 mm |
| Volume | 440 ul | Optical Windows | Two-Way Light (2) |
| Fabrication | Standard 80 | Transmittance | >80% |
| Wavelength Range | 190-2500 nm | Exterior Dimensions | 12.5 × 12.5 × 35 mm |
| Interior Dimensions | 10 × 10 × 33 mm | Z Dimension | 15 mm |
| Cap / Closure | None (Flow Cell) | Package | 1pc/ea |
Applications
◆ UV-Vis absorbance spectroscopy (190–2500 nm)
◆ NIR and short-wave infrared analysis
◆ Continuous on-line process monitoring
◆ HPLC & chromatography detection cells
◆ Water quality & environmental analysis
◆ Pharmaceutical dissolution testing
◆ Chemical kinetics & reaction monitoring
◆ Industrial process analytical technology (PAT)
Why Two-Way Light Windows?
The two-way configuration provides two optically polished opposing faces for standard transmission-mode spectroscopy (UV-Vis, NIR). The remaining two walls are frosted (ground) to suppress internal reflections and stray light, improving baseline stability and measurement reproducibility. This is the most common geometry for absorbance-based flow analysis — compatible with virtually every single-beam and double-beam spectrophotometer on the market.
Why a Flow Cell?
Flow cells enable continuous, real-time spectroscopic monitoring without manual sample handling. Integrated quartz tube flow cells have inlet/outlet tubes fused directly into the cell body — no adhesive joints, no removable fittings. This monolithic construction eliminates the most common failure point (glue degradation at tube joints) and provides exceptional chemical resistance and thermal stability. Simply connect tubing to the protruding quartz ports.
Why Standard 80 Fabrication?
The Standard 80 fabrication uses precision UV-cured adhesive to bond high-purity quartz panels. This method delivers >80% transmittance across the UV-Vis-NIR spectrum while keeping costs accessible. The adhesive joints are optically transparent and spectrally neutral, making Standard 80 cells an excellent choice for routine measurements in aqueous media where aggressive solvents are not required.
Usage Tips: Connect standard laboratory tubing (silicone, PTFE, or Tygon) to the quartz tube ports. For integrated-tube cells, slip tubing over the protruding quartz tubes and secure with tubing clamps. Prime the cell slowly to eliminate air bubbles from the optical path. Flow rate should be adjusted to achieve laminar flow — typically 0.5–5 ml/min for standard cells. The 10 mm path length follows Beer-Lambert law: A = εlc, so absorbance scales linearly with path length and concentration. Clean by flushing with appropriate solvent, then deionized water. Avoid sharp bends in tubing near the cell to prevent stress on quartz connections.
Custom Orders & Academic Purchasing: Need a custom path length, tube diameter, volume, or window configuration? We manufacture made-to-order flow cells tailored to your exact specifications. Academic institutions: we accept Purchase Orders (POs) with pay-after-delivery terms. Request a custom quote.
Disclaimer: Specifications are nominal values measured under standard laboratory conditions. Actual transmittance may vary slightly with wavelength and sample composition. Images are representative; minor cosmetic variations between production batches are normal and do not affect optical performance. For critical applications, request a Certificate of Analysis at time of order.
Additional information
| Weight | 30 g |
|---|
You must be logged in to post a review.
Reviews
There are no reviews yet.