(C102CD12) Quartz Ultra-Micro Cuvette, 10 mm Path, 20 µL

Weight	30 g

SKU: C102CD12

Original price was: $237.00.Current price is: $214.00.

In Stock

C102CD12 is a JGS1 quartz ultra-micro cuvette for UV/Vis spectroscopy with a 10 mm optical path, Two-Way Light layout and 20 µL nominal capacity. Its open-top body and nominal 15 mm Z Height make it useful when you need low-volume filling with a defined beam-center height for holder matching. Supplied as 1 cuvette, with a closure included.

In Stock

SKU: C102CD12 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CD12 is a JGS1 quartz ultra-micro cuvette for UV/Vis spectroscopy that keeps a 10 mm optical path in a 20 µL nominal-volume format. This option combines Two-Way Light transmission with a nominal 15 mm Z Height, so it is a practical choice when you need both low sample volume and a specific beam-centre position. The body is open at the top for direct filling, and the price is for 1 cuvette.

Path Length: 10 mm
Sample Volume (Nominal): 20 µL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Ultra-Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Z Height	15 mm
Sample Volume (Nominal)	20 µL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Body Only
Material	Quartz
Material Grade	JGS1
MQ Grade	Standard 80
Closure Type	Open Top
Closure Included	Yes
Fabrication Method	Standard 80
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose C102CD12 when you want a 10 mm transmission path but need a little more nominal fill volume than the smallest ultra-micro option in this series. The open-top body gives straightforward sample access, and the stated 15 mm Z Height helps you check whether the cell will place the optical centre where your instrument or holder expects it.

What makes this option different

20 µL nominal capacity gives a small-volume format while providing more sample headroom than the 10 µL version.
Open-top access allows direct filling and visual inspection of the sample region before measurement.
Two-Way Light layout supports straight-through UV/Vis transmission through the main optical faces.
15 mm nominal Z Height is useful when holder geometry and beam height are part of the selection.
Standard 80 adhesive-bonded construction suits routine room-temperature water-based samples and buffers rather than organic-solvent methods.

Using this cell

Fill from the open top and make sure the illuminated region is fully covered during measurement. Because this is still an ultra-micro format, add the sample slowly, watch for bubbles, and keep the same seating orientation for blanks and samples.

A closure is included for handling, but this remains an open-top cell body. It should not be treated as a pressure-rated or leak-tight process assembly.

First-use check

Inspect the optical faces and sample opening for dust or residue.
Place the empty cell in the holder and check that it seats squarely.
Run a blank and confirm that the filled region covers the beam without bubbles.
Keep the same orientation for blank and sample measurements.

Fit and optical alignment

The stated body dimensions are 12.5 × 12.5 × 45 mm, and that size applies to the cell body only. Check holder seating and clearance above the opening area if your setup is tight around the cuvette position.

The nominal Z Height is 15 mm from the cell bottom to the optical centre. Compare that with your instrument beam height before ordering. The 20 µL value is a nominal capacity, not a minimum working volume, so verify that your actual fill level covers the beam used in your measurement.

Solvents and cleaning

This cuvette uses Standard 80 adhesive-bonded quartz construction. It is generally selected for room-temperature water-based samples and buffers. Avoid organic samples and organic cleaning solvents with this cell.

The exact chemical limits for the assembled wetted construction are not established here, so check compatibility before use if your sample or cleaning method is chemically demanding. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials, and clean the optical faces gently.

Included with this option

Supplied as 1 cuvette. A closure is included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review related custom JGS1 quartz requirements involving dimensions, optical path length, nominal volume, Z Height, window layout, closures and fabrication. Send your drawing or labelled sketch, holder or instrument details, sample conditions and required quantity. Discuss your requirements and quote part number C102CD12.