(C204CS) Quartz Rectangular Sample Cell, 20 mm / 50 mm (dual path) Path, 40 mL
Original price was: $252.00.$227.00Current price is: $227.00.
C204CS is a JGS1 quartz rectangular sample cell with a 20 mm / 50 mm dual path, Four-Way Light configuration and 40 mL nominal capacity. The open-top design gives direct access to the sample chamber while keeping optical access on all four vertical sides. Sold as 1 cuvette per listed price unit.
Description
C204CS is a JGS1 quartz rectangular sample cell for fluorescence work that combines a 20 mm and 50 mm dual-path layout with Four-Way Light access. Its open-top chamber and 40 mL nominal capacity make it useful when you need direct filling together with optical access from more than one side around the sample region.
- Path Length
- 20 mm / 50 mm (dual path)
- Sample Volume (Nominal)
- 40 mL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Fluorescence Spectroscopy |
| Path Length | 20 mm / 50 mm (dual path) |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 40 mL |
| External Dimensions | 54 × 24 × 52 mm |
| Cell Body Dimensions | 54 × 24 × 52 mm |
| External Dimensions Scope | Body Only |
| Internal Dimensions | 50 × 20 × 50 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Opening Configuration | Open Top |
Choose this option
Choose C204CS when your method is built around this dual-path geometry rather than a single fixed transmission direction. The two path directions, four optical sides and open sample chamber are the key reasons to select this cell when you are planning excitation and collection geometry, chamber access and holder space together.
What makes this option different
- 20 mm and 50 mm path directions in one rectangular cell.
- Four-Way Light access on all four vertical sides.
- Open-top chamber for direct filling, inspection and emptying.
- 40 mL nominal capacity with a stated internal size of 50 × 20 × 50 mm.
- JGS1 quartz body for the stated 200–2500 nm range.
Using this cell
Fill the chamber from the top so the liquid covers the beam region used by your method, then remove bubbles before measurement. Because this cell offers two path directions, keep the orientation consistent between blank and sample and make sure your method uses the path actually selected in the holder.
The open top is useful for direct filling and sample access, but no supplied closure is established for this SKU. If your workflow depends on a stopper, cap or splash control, check that requirement before ordering.
First-use check
- Inspect all optical faces and the inner chamber for dust, residue or chips.
- Place the cell in the holder and verify the intended 20 mm or 50 mm beam direction.
- Run a blank in the final orientation.
- Check that bubbles or droplets are not present in the illuminated region.
Fit and optical alignment
The stated body dimensions are 54 × 24 × 52 mm, with the dimensions applying to the body only. The stated internal dimensions are 50 × 20 × 50 mm. These figures help you plan holder clearance and chamber access, but they do not establish instrument compatibility on their own.
Four-Way Light means all four vertical faces are available for optical access, which is often useful in fluorescence layouts. Z Height is not stated for this SKU, so if your fluorimeter or accessory uses a fixed beam-center height, confirm that point against your holder before purchase.
Solvents and cleaning
The specification does not establish a chemical compatibility list for this SKU. If your work involves aggressive chemicals, heated solutions or long soaking times, check the exact liquid, concentration, temperature and contact time before use. For general background on cuvette construction options, see Compare fabrication options.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials, and wipe the optical faces gently with non-abrasive optical tissue.
Included with this option
1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, path length, sample volume, optical windows or Z Height, closures and related build details. Send a dimensioned drawing or labelled sketch together with holder information, sample conditions and quantity.
Discuss your requirements and quote part number C204CS.
Additional information
| Weight | 100 g |
|---|
You must be logged in to post a review.






Reviews
There are no reviews yet.