(MQQFC052) Quartz Rectangular Sample Cell, 1 mm Path, 430 µL, Open at Both Ends
Description
MQQFC052 is a JGS1 quartz rectangular sample cell for compact setups that need a 1 mm optical path in a narrow straight-through chamber. The Four-Way Light layout, 430 µL nominal capacity and open-at-both-ends structure make it useful when you want a small rectangular cell body that can be built into your own holder or end-sealing arrangement.
This version combines a slim outer profile with a 10 × 1 × 43 mm internal chamber. It is a practical choice when side clearance is limited and the final sample retention, sealing and installation details need to be defined by the surrounding hardware.
- Path Length
- 1 mm
- Sample Volume (Nominal)
- 430 µL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 1 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 430 µL |
| External Dimensions | 12.5 × 3.5 × 43 mm |
| Body Height | 43 mm |
| Base Dimensions | 12.5 × 3.5 mm |
| Internal Dimensions | 10 × 1 × 43 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
Choose MQQFC052 when you need a 1 mm path in a compact rectangular quartz body with direct access through both ends. It suits custom fixtures where the chamber geometry matters, but the closure, support and liquid-handling method will be determined by your own assembly rather than by built-in caps or ports.
What makes this option different
- 1 mm optical path for methods designed around a short stated path length.
- Open at both ends for custom end support, sealing or sample-transfer arrangements.
- Four-Way Light configuration for setups that use optical access from more than one side.
- Slim 12.5 × 3.5 mm outer section with a 10 × 1 mm internal cross-section for compact holder layouts.
Structure and dimensions

Using this cell
Place the cell so the beam crosses the 1 mm optical path, and keep the same orientation for blank and sample. Because the body is open at both ends, sample loading, retention, sealing and bubble control need to be handled by the fixture or end arrangement used in your system.
The nominal capacity is 430 µL for the cell chamber itself. It should not be used as a minimum working volume, and the actual fill condition in use can vary with the way the cell is mounted and sealed in the completed assembly.
First-use check
- Inspect the optical faces and both open ends before installation.
- Confirm that the holder supports the body without twisting or point pressure.
- Check blank measurement, sample retention and bubble removal in the final assembly before routine use.
Fit and optical alignment
Check holder clearance against the outer 12.5 × 3.5 mm section and 43 mm body height rather than the internal chamber size. The internal 10 × 1 × 43 mm dimensions describe chamber space only and should not be treated as the holder opening or sealing-interface size.
Z Height is not stated for this SKU, so beam-center fit should be verified in the actual holder or instrument arrangement. Avoid clamping directly across the transmitting faces, and support the body without twisting or edge stress.

Solvents and cleaning
This cell is made from JGS1 quartz with a supplier-described powder-fused construction. For general fabrication background, see MQ Cuvette Fabrication Glossary.
Chemical limits for the complete working setup are not established by the cell body alone, because seals, fittings and cleaning steps can change the actual compatibility of the assembly. Keep hydrofluoric acid away from quartz, avoid hot strong alkalis and abrasive cleaning materials, and clean the optical faces gently.
Included with this option
1 rectangular sample cell, SKU MQQFC052. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different path length, chamber size or holder fit, send your drawing or labelled sketch with the critical dimensions, sample conditions and target quantity. Custom JGS1 quartz versions can be reviewed separately from the listed SKU.
Send a product-selection enquiry with SKU MQQFC052 and your holder or installation details.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.