A DLS / particle-sizing cuvette is a specialty quartz cell with a flat polished bottom and four optically polished sides, designed for dynamic light scattering instruments (Malvern Zetasizer, Brookhaven NanoBrook, Wyatt DynaPro) that measure 90° or backscatter intensity. Standard DLS cells are 12.5 × 12.5 × 45 mm with 800 µL volume; sub-microliter sizing requires
The selected XRD glass slide has a 10 × 10 × 0.5 mm square recess. A useful brief identifies the powder surface and holder datum, then treats any covering or sealing accessory as a separate part.
A thermostatted cuvette is a sealed quartz cell designed to hold sample at a precisely controlled temperature (±0.1 °C) during a UV-Vis or fluorescence measurement, used in DNA melting curves (40–95 °C), enzyme kinetics (4–60 °C), and protein denaturation studies. The cell is mounted in a Peltier-cooled or water-jacketed holder; a screw cap prevents evaporation,
The 200 mm temperature-control polarimeter-tube reference has separate circulation connections around the sample-tube assembly. Its name describes a configuration, not a measured temperature uniformity or accuracy.
The 100 mm bulb-style polarimeter tube adds a locally expanded section near one end. The guide explains how to define its orientation and filling task without assuming an automatic bubble-removal result.
Cuvette and spectrophotometer verification per USP and EP is a quarterly pharmacopeia-mandated qualification of UV-Vis instruments and their cells, used in pharmaceutical QC to confirm wavelength accuracy (±1 nm), absorbance accuracy (±0.005 AU at A = 1), stray light (< 0.01% at 200 nm), and resolution (≤ 2 nm bandwidth). The protocol uses certified reference
MQAVC001 is the 60 mm nominal-path quartz gas-cell reference with angled end geometry and a single fill stem. Its optical interfaces and containment requirements need separate definition.
A sub-millimeter cuvette is a quartz cell with path length below 1 mm (typically 0.01, 0.05, 0.1, 0.2, or 0.5 mm), designed for high-absorbance samples where a standard 10 mm cell would saturate the detector. Concentrated proteins (≥ 50 mg/mL), undiluted dyes, neat solvents in NIR, and high-OD pharma intermediates all require sub-mm cells to
MQACC002 is an aluminium-alloy adapter reference for supporting a thin cuvette. The adapter, the cell and the instrument holder each have different dimensions that must be matched without blocking the optical region.
MQACC001 provides an adjustable four-slot rack layout for grouping cuvettes on the bench. Slot adjustment, support and retrieval matter more than a broad nominal path range.
Recent Comments