UV-Vis Troubleshooting Guide: Bubbles, Fringes & Drift
Diagnose UV-Vis spectroscopy problems — bubbles in cuvettes, interference fringes, baseline drift, sloping baselines, noise, negative absorbance. With cuvette-specific causes and fixes.
Stoppered Quartz Comparison Tube: Separating Sample Preparation from Measurement
MQQTT006 is an ungraduated, nominal 8 mL stoppered quartz-tube reference. It is a sample-container discussion, not a calibrated volume or fixed-path cuvette specification.
Quartz Cell with Clear Front and Base: Planning Two Adjacent Viewing Directions
MQQHC001 has an open rectangular form with clear front and bottom regions. The holder must leave the required view clear while supporting the sample container.
Screw-Top Cuvette Guide: Sealed Cells for Anaerobic & Long-Acquisition Work
Screw-cap quartz cuvettes for oxygen-sensitive samples, evaporation control, anaerobic measurements, and long fluorescence acquisitions. PTFE liner, septum, and cap material selection.
Thin Circular Quartz Cell: Filling a Wide Window through a Narrow Gap
MQQST011 combines a nominal 1 mm path with a broad circular window and a stopper neck. Its thin sample gap and outside support dimensions answer different fit questions.
Demountable Cuvette Guide: Detachable Quartz Cells & IR Window Assemblies
Demountable / detachable quartz cuvettes for viscous samples, kinetics, paste analysis. Plus how to build your own mid-IR demountable cell with MQ CaF₂ and sapphire windows.
Open Quartz Cell with a Tube: Keeping the Top Accessible
MQQLW005 combines an open mouth with one projecting tube. It invites a combined loading and line-routing discussion, with the installed orientation shown explicitly.
Long-Neck Quartz Cuvette: Allowing Room for the Ground-Joint Closure
MQQST004 extends a narrow measuring body into a long ground-joint neck. The joint and the optical section need separate dimensions and support references.
Cylindrical Cuvette Guide: Diffuse Reflectance UV-Vis Cells
Pick cylindrical reflectance cuvettes for powders, slurries, films and opaque solids. Outer diameter compatibility with Cary, Lambda, Shimadzu, JASCO integrating spheres.
Tall Quartz Sample Cell: Planning the Working Level and Support
MQQHC005 combines a tall 120 mm body with a nominal 50 mm path and 235 mL capacity. The main selection question is how the larger sample is supported and positioned.
Recent Comments